El pasado mes de Abril, la firma alemana Tidal presentó su modelo Agoria, tras cinco años sin sacar al mercado ningún modelo nuevo.
Tidal tiene como norma de empresa tener unos ciclos de producción muy largos, pues entienden que cajas acústicas realmente bien fabricadas, gozan de una calidad casi eterna.
Las Tidal Agoria llegaron para cerrar la brecha demasiado grande, existente entre sus modelos Contriva Diacera y Sunray.
Especificaciones:
- 1 x 30 mm (1.2″) pure diamond tweeter, underhang system, non ferro fluid, decoupled metal alloy housing
- 2 x 173 mm (7″) mm BCC (Black Coated Ceramic) long excursion low distortion midrange woofer, aluminum clamp ring with special curve shape to avoid reflexions from the diaphragm protection grill
- 2 x 280 mm black ceramic sandwich compound woofer, long excursion underhang system
- 3 x 280 mm black ceramic sandwich sub-bass radiator, removable massive aluminum clamp system, adjustable with several different weights
- TIRALIT ™ multi chamber cabinet
- Active/passive bass driver CIC-configuration
- Multi adjustment Varioterminal: tweeter curve, deep bass, upper bass, bass level
- Room coverage: 20 – 120 m², to adapt with Varioterminal adjustment
- TIDAL Unopulse crossover with ultra low tolerance components, exclusive use of silver/gol/oil foil-MKP-capacitors, metalfilm-resistors, ceramic-resistors, massive air-core-inductors, ultra low resistance bass-inductor, microphonically and hermetically isolated x-over boards in seperated chambers
- Optional: SE version, PIO Cast silver/copper parts
- Optional: TIDAL LPX active crossover
- Isolator system out of massive aluminum triggers and stainless steel isolation platforms
- Incl. 2 x ATA-Flightcases
- Serial cabinet finish, high gloss polished piano lacquer: midnight black
- Optional veneer-group 1, high gloss polished woods in piano lacquer: tiger-eucalyptus, curled-bubinga, rose-bubinga
- Optional veneer-group 2, high gloss polished woods in piano lacquer: african pyramided mahogany, ebony-macassar
- Alternative choice for veneer-group 1 and 2: natural silky-dull finishes (non-glossy finish with a noble silky-dull shining)
- Other wishes or veneers: on request.
- Drivers: 2 x 280 mm woofers, 3 x 280 mm subbass-radiators, 2 x 173 mm woofer, 1 x 30 mm tweeter
- Nominal power input: 150 / 300 VA
- Nominal impedance: 4-6 Ohm, no impedance drops below that
- Recommended amp input: real 20 Watt at 8 Ohm are ok for normal listening levels. To use the whole enormous dynamic range of it we recommend 200 watts at 8 ohm.
- Efficiency: since mostly unrealistic numbers of competitors we don’t want to confuse clients by non-saying numbers on paper. Therefore we just write: very good efficiency, an easy load even with tube amps
- Dimensions: 31cm (W) x 60 cm (D) x 169 cm (H)
- Weight: 205 kg (450 lbs.) each, shipment pair 470 Kg (1.030 lbs.)
