Dimensions: 22w x 14d x 11h inch (56w x 36d x 28h cm)
Weight: 90 lbs. (41 kg.)

Crate dimensions: 25w x 17d x 15h inch (64w x 43d x 38h cm)
Weight: 120 lbs (55 kg)
Rotational speed: 33.3 rpm and 45 rpm

Power supply: dual channel pure class A linear DC
AC voltage input: 110v or 220v factory set
DC voltage output: 0 to 5 volt, dual cpu controlled, factory calibrated
DC transmission: pico 3 pin cable
Data input/output bus: RS232
Transmission: pico 4 pin cable
Motors: 2432 precious brushes dc motors (qty 2)
Motor mounts: delrin enclosure , height adjustable

Speed guidance system: continuous open loop feedback
Sensors type: optical diode I/O (each platter)
Correction cycle: every two rotations. 1.5% max. 0.05% min.
Monitoring: twin real time speed led display
Command input type: 1 capacitance sensor on/off (left)
Command input type: 1 capacitance sensor 33/45 (right)

Platters type: composite layers and encapsulated, balanced
Platter weight: 30 lbs / platter
Drive: 3 silicone / viton 1.8 sting belts / platter
Compensation pulley: Teflon and Chrome steel bearing
Lubricant: synthetic grease
Sevice interval: 1 year (clean and re-grease)

Main bearings: dual hydraulic isolated inverted sleeve and ball
Shaft type: grounded heat hardened tool steel pvd coated
Ball type: ceramic top platter, steel lower platter
Lubricant: 8 ml. variable viscosity synthetic oil
Service interval: 5 years (clean and re-oil)

Suspension: full floating top suspended
Elastomers: 317 o-rings , viton / silicone mix
Service life: lifetime

Kronos web

Comments are closed.